Read LG WP-1150 Service Manual online
-11-
4-6. Washing Tub Assembly
replacement
After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin
dryer cover, the washing cover, the Q-spring, the
nozzle case, the door switch and the back cover,
proceed as follows:
1. Disconnect the drain hose or the drain hose-D
1. Disconnect the drain hose or the drain hose-D
(Pump model).
2. Remove the V-belt from the pulsator pulley(Fig. 33).
4-7. Gear Case Assembly
replacement
After removing the back cover and opening the
washing cover, proceed as follows:
1. Take out the pulsator cap with "-" type driver.
2. Loosen the pulsator fixing screw and pull up the
1. Take out the pulsator cap with "-" type driver.
2. Loosen the pulsator fixing screw and pull up the
pulsator(Fig. 35).
3. Remove the screws fastening the washing tub
assembly and pull it out(Fig. 34).
3. Remove the V-belt(Fig. 36).
4. Lay the washing machine on its front side on a
blanket or some cardboard.
5. Unscrew and remove the screws fastening the base
and remove the base assembly(Fig. 37).
To assemble the washing tub assembly, reverse
the disassembly procedure.
NOTE
Apply adhesive on hose joint to prevent
water leaks.
Fig. 33
Fig. 34
Fig. 35
Fig. 36
Fig. 37
Click on the first or last page to see other WP-1150 service manuals if exist.