WP-1100R - LG Washing Machine Service Manual (repair manual). Page 10

-10-

2. Disconnect the lead wires.

3. Lay the washing machine on its front side on a

blanket or cardboard.

4. Remove the screws fastening the base and remove

the base from the outcase(Fig. 22).

5. Hold the wash motor, and remove the nuts.

(Fig. 29)

6. Remove the special bolt assemblies and remove

the wash motor from the base.

7. Pull out the damper lowers and damper washers.

8. Loosen the socket bolt fastening the motor pulley

assembly and remove the motor pulley assembly
from the motor.(Fig. 30)

To assemble the wash motor assembly to the base,
reverse the above diassembly procedure.

After removing the back cover and the spin dryer
basket, proceed as follows:

1. Remove the V-belt from the pulsator pulley(Fig. 28).

Fig. 28

Fig. 29

Fig. 31

Fig. 30

9. Remove the screws fastening the brake assembly

and remove the brake assembly(Fig. 27)

To assemble the spin motor, reverse the
disassembly procedure.

Fig. 27

After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin
dryer cover, the washing cover, the Q-spring, the
nozzle case, the door switch and the back cover,
proceed as follows:

1. Disconnect the drain hose(Non pump model) or

the drain hose-D(Pump model).

2. Unscrew and remove the screws fasting the spin

dryer cover guide.(Fig. 31)

3. Remove the spin dryer cover guide from the tub.

(Fig. 31)