Read LG WP-1100Q Service Manual online
-11-
4. Unscrew and remove the screw fasting the nozzle
case assembly.(Fig. 32)
5. Remove the nozzle case assembly from the tub.
(Fig. 32)
4-7. Gear Case Assembly
replacement
After removing the back cover and opening the
washing cover, proceed as follows:
washing cover, proceed as follows:
1. Take out the pulsator cap with "-" type driver.
(WP-1100Q(P) / WP-1100G(P) only)
2. Loosen the pulsator fixing screw and pull up the
pulsator(Fig. 36).
6. Remove the V-belt from the pulsator pulley(Fig. 28)
7. Unscrew the screws on both sides and pull off the
front panel.(Fig. 33)
8. Unscrew and remove the screws on the front and
the rear.(Fig. 34)
3. Remove the V-belt(Fig. 28).
9. Pull out the washing tub assembly.(Fig. 35)
To assemble the washing tub assembly to the out
case assembly, reverse the above disassembly
procedure.
case assembly, reverse the above disassembly
procedure.
4. Lay the washing machine on its front side on a
blanket or some cardboard.
5. Unscrew and remove the screws fastening the base
and remove the base assembly(Fig. 22).
Fig. 32
Fig. 33
Fig. 34
Fig. 36
Fig. 35
Click on the first or last page to see other WP-1100Q service manuals if exist.