WM-710NW1 - LG Washing Machine Service Manual (repair manual). Page 26

• Load is too small.
• Load is out of balance.
• The appliance has an imbalance detection

and correction system. If individual heavy
articles are loaded (ex. bath mat, bath robe,
etc.) this system may stop spinning or even
interrupt the spin cycle altogether.

• If the laundry is still too wet at the end of the

cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.

• Water supply is not adequate in area.
• Water supply taps are not completely open.
• Water inlet hose(s) are kinked.
• The filter of the inlet hose(s) are clogged.

Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.

Clean and straighten the drain hose.
Clean the drain filter.

Add 1 or 2 similar items to help 
balance the load.
Rearrange load to allow proper 
spinning

Close the door.
If it is not released, call for service.

Unplug the power plug and call for 
service.

Close the water tap.
Unplug the power plug.
Call for service.

• Drain hose is kinked or clogged.
• The drain filter is clogged.

• Is the door opened?

• Water overfills due to the faulty water valve.

• Water level sensor has malfunctioned.

24

F**68*D(P)

25