WM-14391TD - LG Washing Machine Service Manual (repair manual). Page 6

Read LG WM-14391TD Service Manual online

5
nstallation
I
1. To prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
remove 
the bolts along with the rubber bungs.
• If they are not removed, it may cause
heavy vibration, noise and malfunction.
3. Take out the 4 bolts along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future use.
• Whenever the appliance is transported,
the transit bolts must be refitted.
The appliance is fitted with transit bolts to prevent internal damage during transport.
• Packing and all transit bolts
must be removed before using
the washer.
When unpacking the base, be
sure to remove the additional
packing support in the middle 
of the base packing. 
2. Unscrew the 4 bolts with 
the spanner supplied.
4. Close the holes with the caps supplied.
 Transit bolts
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances. 
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times. 
Any damage which may be cause by cockroaches or other vermin will not  be covered by the appliance
guarantee.
 Removing transit bolts
Base Packing
Washer
Packing Support
(Packing support may not 
 be used depending on
 models.) 
Page of 28
Display

Click on the first or last page to see other WM-14391TD service manuals if exist.