WM-128NW - LG Washing Machine Service Manual (repair manual). Page 31

Read LG WM-128NW Service Manual online

31
NO
Are the resistance of the 
Hall Sensor
5~15kΩ?
Motor Locked Error (LE)
[Pre Check]
• Gentle wash cycles, such as Perm Press, Delicates, Hand Wash, and Wool/Silk should only be used for smaller loads.
Because these cycles are more gentle in tumbling and spinning, putting too much in the drum can register an issue
with the motor. Remove items, reset unit and test with a Rinse/Spin cycle.
• Don’t replace the PCB, when the hall sensor is replaced.
Replace the PCB, when the LE is displayed after replacing the hall sensor.
Is the 
Connector
connected correctly to 
the 
Main PCB
and the 
Motor
?
Is the 
Harness
alright ?
YES
NO
YES
YES
YES
YES
NO
Disassemble the 
Rotor
.
Is the 
Magnet
of rotor cracked or broken?
• Ha ~ Common 
: 5 ~ 15 k
• Hb ~ Common 
: 5 ~ 15 k
Replace the 
Main PCB
.
Press the 
Power
button & 
Start / Pause
button.
Does the
Drum 
stop when the start/pause button is pressed to start the cycle ?
Or Sometimes does the 
Drum
rotate weakly (under 15rpm)?
Magnet
Ha
Hb
Common
Is the resistance the same
between 
Stator
points?
V~U / U~W / W~V : 8~11Ω
V  U  W
V   U   W
Reconnect or repair the 
Connector
.
Or replace the 
Harness
.
Replace the 
Rotor
.
Replace the 
Hall Sensor
.
Disassemble 
hall sensor carefully. 
(Next page)
NO
Replace the 
Stator
.
Page of 59
Display

Click on the first or last page to see other WM-128NW service manuals if exist.