Read LG WFT8502TEPT Service Manual online
7
Rubber packing
Screw
Fixed sticker
Rubber packing
Guide plate
Connector
Connector
Fixed sticker
Middle
Connector
Connector
Middle
Connector
Connector
Water Supply Hose
Pressing rod
Pressing handle
Connector
Middle
connector
connector
Fixed Stiicker
Pressing Handle
Pressing Rod
Water Supply Hose
Separate Middle connector from Water
Supply Hose
Supply Hose
Separate Middle connector from the Water Supply
Hose by pulling the Pressing Rod and the Pressing
Handle that is attached to the Water Supply Hose
while pressing them.
Hose by pulling the Pressing Rod and the Pressing
Handle that is attached to the Water Supply Hose
while pressing them.
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
tap can be placed in the middle.
Fixing Connectors to the Tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
packing is in tight contact with the tap. Then
tighten the 4 screws.
Fixing Upper Connector and Middle
Connector
Connector
Remove the fixed sticker in between the Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
Connecting Middle Connector and
Water Supply Hose
Water Supply Hose
Press down the pressing rod of the Water
Supply Hose which was separated from middle
connector(refer to Step1) and then join it to the
middle connector.
Supply Hose which was separated from middle
connector(refer to Step1) and then join it to the
middle connector.
One Touch Type
If the tap diameter is too large or is square, open
the 4 screw and take out the guide plate and
follow step 1.
the 4 screw and take out the guide plate and
follow step 1.
In case the tap is large.
Note
Checking the water leakage
After connecting the hose, open the tap to check for
any water leakage.
In case of water leakage, close the tap and start again
from step 1.
If you skip step1, it may cause water leakage.
any water leakage.
In case of water leakage, close the tap and start again
from step 1.
If you skip step1, it may cause water leakage.
(NORMAL TAB WITHOUY THREAD & ONE TOUCH TYPE INLET HOSE.)
1
2
3
4
5
6
Click on the first or last page to see other WFT8502TEPT service manuals if exist.