Read LG WFT8061DD Service Manual online
10. Test running
Applied model: WFT806DD
Water test mode
●
Water test mode
●
Use test program and press “DELAY”,”RINSE”and “POWER” together under no load and
water level around 28L .
water level around 28L .
●
All the indicators are on under “TEST” mode. Press “START/PAUSE” to test following items.
Number
Test method
LED display
Test items
1
Initial status
Alternation display of Version U: 00
and water level frequency
Water level sensor abnormal
display“PE“
All the indicators are
on。
Water level frequency
is 218-250。
2
Press one time
Display “1“
Test Alpha stream
3
Press twice
Display “2“
Alpha stream stops
4
Press three times
Display hardness value
Hardness value is
0-255
5
Press four times
Display “4“
Drain
6
Press five times
Automatic switch is off
All indicators are off
Anhydrous test mode
●
Use test program and press “DELAY”,”RINSE”and “POWER” together under no load and no
water.
water.
●
Test following items under TEST mode.
Number
Test method
LED display
Test items
1
Initial status
Display “TS”
2
Press “WASH” and then press
“START/PAUSE”
Display “20”
Check if it is under normal
“WASH” condition
3
Press “POWER/AUTO OFF”
Automatic switch is off
All the indicators are off
4
Press combination button again
Display “TS”
Press “SPIN” and then press
“START/PAUSE”
5
Display “10”
Check if it is under normal
“SPIN” condition.
4
2
Click on the first or last page to see other WFT8061DD service manuals if exist.