Read LG WFT11D81EP / WF-T1377TP / WF-T1478TP Service Manual online
36
4-4. ADJUSTMENT
1) Brake lever adjustment
Shown as in the figure, untighten the adjustment screw
to keep clearance less than 1.9
to keep clearance less than 1.9
0.1mm between the
tip and the brake lever. And turn on the lock nut then
paint it red.
paint it red.
Painting part is adjusted in factory, it does not
need adjusting.
need adjusting.
Adjust the screw properly if the brake doesn't
work during spin.
work during spin.
Clutch pulley must be turning to one side P.V
Link is pulling the brake Lever.
Link is pulling the brake Lever.
Clutch pulley must be turning to the left and the
right when P.V Linke does not pull the brake
Lever.
right when P.V Linke does not pull the brake
Lever.
When the V-belt is not properly adjusted, the
motor will not be running or the belt will be
slipping.
motor will not be running or the belt will be
slipping.
2) Keeping clearance
Keep the clearance about 2.0 ~ 3.5 mm between brake
lever and P.V link as shown in the figure.
lever and P.V link as shown in the figure.
3) V-belt adjustment
Adjust the motor pulley by pushing the motor like arrow
, to make V-belt tension parallel when pushed at the
point of arrow
.
CAUTION
CAUTION
CAUTION
Click on the first or last page to see other WFT11D81EP / WF-T1377TP / WF-T1478TP service manuals if exist.