Read LG WFSL1532EK Service Manual online
48
10) Spin extraction is not proceeded.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Motor
1. In the case that the wash motor does not
spin during spin extraction;
1) Check there is motor working
sound,or
2) If there is no motor-working
sound;
Check frequency of the
Ball Pressure Sensor
(Pressure Switch), under no load,
or
(Pressure Switch), under no load,
or
Check contact defect of the safety
switch, defect of connection parts
and whether the lid is open if door
error is displayed.
switch, defect of connection parts
and whether the lid is open if door
error is displayed.
Is placed the magnetic in Lid-B.
Check resistance of the motor.
Drain Motor/Clutch
1. In the case the motor rotates but the
inner tub does not rotates;
1) Check resistance of the drain
motor if the drain motor doesn’t
work,or
2) Check gap between the PV link
and the brake lever if the inner
tub does not rotates while the
drain motor works.
tub does not rotates while the
drain motor works.
There is motor
working sound.
working sound.
Less than
26.3
The lid is open
Defect of
connection part.
connection part.
The lid is open.
Defect of magnetic in
LID-B
LID-B
Contact defect of
the Ball Pressure
Sensor(Safety
Switch)
the Ball Pressure
Sensor(Safety
Switch)
Resistance is
normal
normal
The clearance is
less than 2.0mmor
more then 3.5mm
less than 2.0mmor
more then 3.5mm
The gap is normal
(2.0~3.5mm)
(2.0~3.5mm)
Defect of the
capacitor or
Mechanically
capacitor or
Mechanically
locked.
Defect of the
Ball Pressure
Sensor(Pressure
Switch).
Sensor(Pressure
Switch).
Mistake in use.
Mistake in use.
Coil is open.
Coil is open.
Defect of
connection part or
defect of the
controller.
Defect of
connection part or
defect of the
controller.
Assembling defect
of the drain motor or
the clutch
of the drain motor or
the clutch
Defect of the clutch.
Change the capacitor
after checking defect of
capacitor.
check whether the
after checking defect of
capacitor.
check whether the
washing clutch or the
washing tub is blocked
if the motor rotates after
removing the V-belt.
removing the V-belt.
Check whether the
motor is locked if the
motor does not rotates
even though the V-belt
being removed.
motor is locked if the
motor does not rotates
even though the V-belt
being removed.
Change the Ball Pressure
Sensor(Pressure Switch).
Sensor(Pressure Switch).
Explain “The lid is close
during operation”
during operation”
Reconnect the conncetors.
Explain“The lid is close
during operation”
during operation”
Change the Lid-B
Change the Ball Pressure
Sensor(Safety Switch).
Sensor(Safety Switch).
Change the motor.
Change the drain motor.
Change the controller after
checking connection parts.
checking connection parts.
Reassemble the drain
motor or the clutch to
keep the clearance.
motor or the clutch to
keep the clearance.
Change the clutch.
Click on the first or last page to see other WFSL1532EK service manuals if exist.