Read LG WF-T8510TPT Service Manual online
7
R ubber packing
Screw
Fixed sticker
R ubber packing
G uide plate
C onnector
C onnector
Fixed sticker
M iddle
C onnector
C onnector
M iddle
C onnector
C onnector
W ater Supply H ose
Pressing rod
Pressing handle
C onnector
M iddle
connector
connector
Fixed Stiicker
Pressing H andle
Pressing R od
W ater Supply H ose
Separate Middle connector from Water Supply Hose
Separate M iddle connector from the W ater
Supply H ose by pulling the Pressing R od and
the Pressing H andle that is attached to the
W ater Supply H ose w hile pressing them .
Loosen the fixed nuts to connect the connector to the tap
U ntighten the screw of the connector so that
the tap can be placed in the m iddle.
Fixing Connectors to the Tap
Push the upper connector up till the rubber
packing is in tight contact w ith the tap. Then
tighten the 4 screw s.
Fixing Upper Connector and Middle Connector
R em ove the fixed sticker in betw een the
U pper and M iddle C onnectors. Tighten the
connectors by holding one connector and
tw ist m iddle connector to the right.
Connecting Middle Connector and Water Supply Hose
Press dow n the pressing rod of the W ater
Supply H ose w hich w as separated from
m iddle connector(refer to Step1) and then
join it to the m iddle connector.
One Touch Type
If the tap diameter is too large or is square,
open the 4 screw and take out the guide
plate and follow step 1.
open the 4 screw and take out the guide
plate and follow step 1.
In case the tap is large.
Note
Checking the water leakage
After connecting the hose, open the tap to
check for any water leakage.
In case of water leakage, close the tap and
start again from step 1.
If you skip step1, it may cause water leakage.
check for any water leakage.
In case of water leakage, close the tap and
start again from step 1.
If you skip step1, it may cause water leakage.
(NORMAL TAB WITHOUY THREAD & ONE TOUCH TYPE INLET HOSE.)
1
2
3
4
5
6
Click on the first or last page to see other WF-T8510TPT service manuals if exist.