Read LG WF-T8014HN Service Manual online
42
6) Pulsator doesn’t rotate normally.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
4. Pulsator weakly rotates.
1) Check voltage at the power outlet
where the washer is plugged into.
2) Check capacitance of the
capacitor.
Less than 85%
of rating.
of rating.
Indicating
needle rises and
immediately
indicates
needle rises and
immediately
indicates
The needle is
stopped after it
is raised.
stopped after it
is raised.
The needle
doesn’t move.
doesn’t move.
Lower voltage.
Capacitor is
normal.
normal.
Lack of
capacitance of the
capacitor.
capacitance of the
capacitor.
Capacitor is fully
discharged.
discharged.
Explain the causes and a
transfomer should be
used if necessary.
transfomer should be
used if necessary.
Change the capacitor.
Change the capacitor.
7) Water does not drain.
Where, what & how to check?
Result of Check
Possible Cause How to repair & settle
Drain Hose
1. Check whether the drain hose is put
in a narrow space and kinked.
2. Check whether the internal drain
rubber asm is bent.(For Non-pump
model)
model)
3. Check whether the end of the drain
hose submerged into water or
higher than required.
higher than required.
(For non-pump model)
Kinked.
Bent.
Submerged or
higher than
required.
Defect of
installation.
installation.
Defect of the drain
rubber asm.
rubber asm.
Defect of
installation.
installation.
Reinstall so that it should
not be kinked.
not be kinked.
Change the drain rubber
asm.
asm.
Re-install so that it can’t
be submerged or not
higher than required.
be submerged or not
higher than required.
Click on the first or last page to see other WF-T8014HN service manuals if exist.