WF-T7050TD - LG Washing Machine Service Manual (repair manual). Page 10

■ For pump model

• Connect the drain hose to the

outlet of the drain pump located
at the rear of the washing
machine.

• Attach the clip to the drain hose.

And then push it toward the body
of the washing machine as
indicated by the arrow.

• Check that the drain hose is

hung up over the edge of the
laundry tub.

• Do not use an extension hose.

● NOTE : • Never lay down the drain hose, as water will be discharged.

• Be sure the drain hose is properly routed so it will not kink or lift from the sink.
• The discharge height should be approximately 0.9~1.2m from the floor.
• Connect the drain hose adjusting the length of it not to be dropped. If drain hose is dropped the

drainage could be poor because of blockage in the hose.

 

 

■ For non - pump model

• Connect the drain hose to the outlet of the drain

located at the back side of the washing machine.

• Fix the drain hose with the clip.

And then push it toward the body as in the figure.

• Keep it downward while the washing machine is working.
• Ensure the hose is free from kinking.

Drain Hose

0.9~1.2m

Within 50mm

Hose
Guide