WF-T1404TP - LG Washing Machine Service Manual (repair manual). Page 16

2 hr

1 hr

30 min.
(Tubdry)

QUICK Wash

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by

8minutes at maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically

adds rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to

the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a

liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

- During operation, the remaining time

is indicated.

(RESERVATION) - When DELAY START
(RESERVATION)  program is selected, it
indicates the finishing time. (RES.=DELAY)

-When an error occurs, an error

message appears to indicate the abnormality. 
For example,           indicates that the lid is open.

pushed.

the button is pushed 3  4 

5 

...11  12  14      16 

...46 

48 3 

HOUR.

switch off.

Use to adjust the WATER LEVEL as required. The
appropriate amount of Detergent is shown next to the
WATER LEVEL in the WATER-DETERGENT diagram
WATER LEVEL is automatically selected for FUZZY
(normal) program.
The following settings are indicated as the button is pushed  
LARGE         LARGE . EX-LARGE        EX-LARGE
SMALL        SMALL MEDIUM        MEDIUM
MEDIUM LARGE        LARGE

This button is used for air-drying of your

laundry.

Air dry selections light up in sequence as

follows.

30min.      1hr       2hr      30min. as the
button is pushed.

Use when wash, rinse, spin
time need to be adjusted.
The time increases when the
button is pressed . 
If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes. 
When the button is  pressed
during washing, the remaining
time is displayed. 

Temperature. 
Pressing the button allows
you to select  COLD
WARM (HOT&COLD)
HOT      COLD
respectively.  
Default setting is COLD.