WF-T122, WF-T140, WF-T141, WF-T142, WFT10C31EP, WF-TS1088TH - LG Washing Machine Service Manual (repair manual). Page 19

The pulsator rotates for
8 seconds to detect the
laundry load.
Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.

Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.

When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.

If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the WATER LEVEL.
With lightweight bulky loads, WATER LEVEL
can be set low. 
Changes to Water Temperature
(HOT/COLD) and wash level are possible
during operation.  

When setting the WATER LEVEL manually,
do not set to Medium to prevent damage to
laundry.
Washing with HOT water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.

In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing may
still contain some water. This is normal.

If WOOL wash is selected, GENTLE SPIN
will be set automatically.

Before starting to wash, make sure that the
laundry is washable.
Washing with HOT water may damage the
laundry (Water is set to COLD
automatically).