WF-T1064TP - LG Washing Machine Service Manual (repair manual). Page 16

3-3. FUNCTION OF EACH BUTTON

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at

maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds

rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the

washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a liquid one or

a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

• Time left - During operation, the remaining time

is indicated.

(RESERVATION) - When DELAY START
(RESERVATION)  program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication -When an error occurs, an error

message appears to indicate the abnormality. 
For example,           indicates that the lid is open.

• Use to select the proper amount of water in relation

to the weight and type of laundry.

• Automatically controlled, but can be selected

manually by pressing the WATER LEVER Botton.

• WATER LEVEL is automatically selected for

FUZZY (normal) program.
The following settings are indicated as the button is
pushed
7

8 • 9 

10

1

2 • 3 

4

5 • 6 

7

• Use to lock or unlock the control

buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and
SPIN buttons simultaneously and
to unlock push them one more
time during the washing process.

• This button is used for air-drying of your

laundry.

• Air dry selections light up in sequence as

follows.

30

60

90

120

30 as the button

is pushed.

• Use to select Water

Temperature.
Pressing the button allows
you to select  COLD 
WARM (HOT&COLD) 
HOT

COLD

respectively.
Default setting is COLD.

• Use when wash, rinse, spin

time need to be adjusted.

• The time increases when the

button is pressed . 

• If adjustments are needed

during the wash, press the
[start/pause] button before
making any changes. 

• When the button is  pressed

during washing, the remaining
time is displayed.