WF-M11SC - LG Washing Machine Service Manual (repair manual). Page 20

PRO-

GRAM

PRO-

CESS

PRO-

GRAM

PRO-

CESS

DELAY

START

WATER

LEVEL

ST

START

ART

PAUSE

WATER

TEMP.

The pulsator rotates for 8
seconds to detect the laundry
load.
Then the water level and the
amount of detergent to be
used will be shown and water
will be supplied.

Water will be
supplied for 2
minutes after the
start of the wash
to supplement the
water the laundry
has absorbed.

When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.

If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level
can be set low. 
Changes to water temperature (hot/cold)
and wash level are possible during
operation.   
(refer to page 12)

The water level and the
amount of detergent to be
used will be shown and
water will be supplied.

When setting the water level manually, do
not set to MEDIUM to prevent damage to
laundry.

Washing with hot water may damage the
laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.

In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.

Speedy Soak Wash cannot be selected
for the Wool Wash program.

If wool wash is selected, Gentle Spin will
be set automatically.