Read LG WF-1100 / WF-S1250 / WFT10C60EH / WFT10C61EC / WFT10C61EE / WF-T1111D / WF-T1230TD / WF-TS1288TH Service Manual online
53
(3) Activate/Deactivate Sensor:
Turn the power switch on by pressing WATER LEVEL+STAIN LEVEL+RESERVATION button together.
Test mode : Only I-SENSOR LED is on and display shows current sensing mode
Current display
: temperature & conductivity sensing is disabled
: temperature sensing is enabled, but conductivity is disabled.
: temperature & conductivity sensing is enabled
1. Press WATER LEVEL BUTTON once:
Press WATER LEVEL BUTTON again : power off
2. Press RINSE BUTTON once:
Press RINSE BUTTON again : power off
3. Press START/PAUSE BUTTON once:
Press START/PAUSE BUTTON again : power off
(4) How to change Controller Group
Turn the power switch on by pressing WATER LEVEL + PROGRAM and STAIN LEVEL button together.
Initial Test mode display : All LEDs are off,except I-SENSOR LED
Display the number of TR calibration times : Display “ ” means not calibrated, “ ” for the
first time and so on.
first time and so on.
1. Press Program button once: Display the current Controller Group (1~26)
Program button again : Decrease the controller group by one (display the changed group)
Program button to decrease by one
Program button to decrease by one
2. Press START/PAUSE button once : Display the current Controller Group (1~26)
Press START/PAUSE button again : increase the controller group by one (display the changed group)
START/PAUSE button to increase by one
START/PAUSE button to increase by one
The buzzer sounds if there is no controller group.
Click on the first or last page to see other WF-1100 / WF-S1250 / WFT10C60EH / WFT10C61EC / WFT10C61EE / WF-T1111D / WF-T1230TD / WF-TS1288TH service manuals if exist.