Read LG WD-S12MPAC / WD-S12MPCC / WD-S12MRCC Service Manual online
2
4
NO
YES
YES
YES
NO
NO
NO
YES
(1)
(1)
(1)
(2)
S P I N T R O U B L E
Check the S.PRESSURE SWITCH
ASSEMBLY or HOSE (Pressure).
If the problem is on the
S.PRESSURE SWITCH
ASSEMBLY or the HOSE, replace
the S.PRESSURE SWITCH
ASSEMBLY or the HOSE.
ASSEMBLY or HOSE (Pressure).
If the problem is on the
S.PRESSURE SWITCH
ASSEMBLY or the HOSE, replace
the S.PRESSURE SWITCH
ASSEMBLY or the HOSE.
Normal
Correct the connector.
Replace the STATOR
ASSEMBLY
ASSEMBLY
Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the Rinse and Temp. buttons at
the same time on the program.
water level 248 or more. The frequency can be
checked by pressing the Rinse and Temp. buttons at
the same time on the program.
When pressing Rinse, Temp. and POWER buttons
at the same time after power off, press the
Start/Pause button 1 times, is the drum low speed
spin?
at the same time after power off, press the
Start/Pause button 1 times, is the drum low speed
spin?
Is it disconnected, or disassembled?
[Red:3pin(1), GY:4pin(2)]
[Red:3pin(1), GY:4pin(2)]
Check the motor connector, is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
Resistance of terminal:
①
①~
~②
② / ②
②~
~③
③ / ③
③~
~①
① : About 5Ω
Ω~15Ω
Ω
Replace the MAIN PWB ASSEMBLY
①
① ②
② ③
③
Does the spring of Latch Hook actuate?
Is there clicking sound once or twice when the
START/ PAUSE button is pressed to start the cycle?
START/ PAUSE button is pressed to start the cycle?
Is DOOR SWITCH ASSEMBLY broken?
Replace Door Assembly.
Check the DOOR SWITCH
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Natural 4 pin).
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Natural 4 pin).
Replace the DOOR
SWITCH ASSEMBLY.
SWITCH ASSEMBLY.
Click on the first or last page to see other WD-S12MPAC / WD-S12MPCC / WD-S12MRCC service manuals if exist.