Read LG WD-16330FDN / WD-16340FD / WD-16345FD Service Manual online
30
Remove the BACK COVER.
Unscrew the bolt to pull out the ROTOR ASSEMBLY.
Disconnect the wiring connector.
Unscrew 6 bolts from the STATOR.
Remove the STATOR.
Note : Hook of connector (1) is on the backside
Pull out the HINGE, pressing its snap.
Do not use the pulled out HINGE again
Do not use the pulled out HINGE again
It may be taken off during operation.
(1)
Hinge
Damper
Rotor
Bolt
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER ASSEMBLY
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER ASSEMBLY)
Clean the drain pump filter
3
2
3
2
2. Unplug the drain plug ( ),
allowing the water to flow out. At this
time use a vessel to prevent water
flowing on to the floor. When water
does not flow any more, turn the
pump filter ( ) to open to the left.
time use a vessel to prevent water
flowing on to the floor. When water
does not flow any more, turn the
pump filter ( ) to open to the left.
3. Remove any foreign material
from the pump filter ( ). After
cleaning, turn the pump filter ( )
clockwise and insert the drain
plug (
cleaning, turn the pump filter ( )
clockwise and insert the drain
plug (
)to the original place.
close the lower cover cap.
1
100
1. Open the lower cover
cap ( ) by using a
coin. Turn the drain
plug ( ) to pull out
the hose.
coin. Turn the drain
plug ( ) to pull out
the hose.
Click on the first or last page to see other WD-16330FDN / WD-16340FD / WD-16345FD service manuals if exist.