Read LG WD-12EFW Service Manual online
1⃞ Before servicing ask troubles of customers
2⃞ Check the adjustment(power supply is 110V ac 60Hz, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance whether it works O·K or NOT.
2⃞ Check the adjustment(power supply is 110V ac 60Hz, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance whether it works O·K or NOT.
■ STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON FLAT AND FIRM SURFACE
HORIZONTAL
Remove the transit bolts
(4EA:
①)with supplied spanner.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
provided into the hole
4. INSTALLATION
8
1
2
• Level the legs by using a spanner
provided.
(Turning clockwise to raise the
height of washing machine and
counterclockwise to lower.)
For your convenience, an auto
leveling leg of this product is
automatically adjusting the leveling
of the product to the some
degree(effective on 2~15cm titled
floor)
(Turning clockwise to raise the
height of washing machine and
counterclockwise to lower.)
For your convenience, an auto
leveling leg of this product is
automatically adjusting the leveling
of the product to the some
degree(effective on 2~15cm titled
floor)
2~15mm
Click on the first or last page to see other WD-12EFW service manuals if exist.