Read LG WD-12470BDM / WD-12475BDM / WD-12476BDM / WD-12477BDM Service Manual online
ERROR
SYMPTOM CAUSE
8
9
• MAIN PWB ASSEMBLY is out of order
Replace the MAIN PWB ASSEMBLY
• Winding in the STATOR ASSEMBLY is short-circuited.
Replace the STATOR ASSEMBLY
• “ ” is dispplayed during a high spin
Replace the LEAD WIRE ASSEMBLY (MOTOR)
• The connector in the LEAD WIRE ASSEMBLY is not connected to
the connnector of STATOR ASSEMBLY
Reconnect or repair the connector
• The hall sensor is out of order/defective.
Replace the STATOR ASSEMBLY
CURRENT
ERROR
MOTOR
ERROR
16
• Loose Ball Sensor Connector.
• Ball Sensor is out of order.
• Ball Sensor is out of order.
※ Displayed only when the START/PAUSE button is first
pressed in the QC Test Mode.
11
BALL
SENSOR
ERROR
• The washer experienced a power failure.
• Restart the cycle.
• Restart the cycle.
13
POWER
FAILURE
• EEPROM is out of order.
※ Displayed only when the START/PAUSE button is first
pressed in the QC Test Mode.
12
EEPROM
ERROR
Click on the first or last page to see other WD-12470BDM / WD-12475BDM / WD-12476BDM / WD-12477BDM service manuals if exist.