Read LG WD-1243FB Service Manual online
39
①
① Remove the back cover.
②
②
② Take off the belt turning the pulley.
③
③
③ Unscrew the bolt to pull out the pulley.
①
① Unscrew 2 screws from the bracket.
②
②
② Push the motor in the arrow direction for
disassembling.
③
③ When reassembling the motor, make sure that motor
mounting bushings are not taken off from the bracket.
①
① Pull out the hinge, pressing its snap.
②
②
② Do not use the pulled out hinge again. It may be taken
off during operation.
1
2
3
Hinge,
Damper
Damper
Damper
PULLEY, MOTOR, DAMPER
(PULLEY)
(MOTOR)
(DAMPER)
Open the lower cover cap (
)
by using coin.Turn the drain plug
(
(
) to pull out the hose.
Unplug the drain plug (
) , then
the water flows out.
At this time use a vessel
to prevent water flowing on the
floor. If the water does not flow any
more,turn the pump filter (
At this time use a vessel
to prevent water flowing on the
floor. If the water does not flow any
more,turn the pump filter (
)
open to the left.
Take out any foreign material
from the pump filter (
from the pump filter (
).
After cleaning, turn the pump
filter (
filter (
) clockwise and insert
the
drain plug (
) to the
original place. close the lower
cover cap.
cover cap.
Clean the drain pump filter
1
100
3
2
3
2
■ WD-6550F(B) / WD-8050F(H)(B) / WD-1050(5)F(H)(B) / WD-1253(5)F(H)(B)
Click on the first or last page to see other WD-1243FB service manuals if exist.