Read LG WD-12400TDK Service Manual online
31
NO
YES
YES
YES
NO
NO
YES
NO
NO
YES
SPIN TROUBLE
Check the sensor
(Pressure) or hose
(Sensor).
If the problem is on the
sensor or the hose, replace
the sensor or the hose.
(Pressure) or hose
(Sensor).
If the problem is on the
sensor or the hose, replace
the sensor or the hose.
Normal
Correct the connector.
Correct the connector.
Replace the STATOR
assembly.
assembly.
While spinning, is the frequency of the
water level 248 or more?
water level 248 or more?
Pressing QC test mode buttons at the same
time after power off, press the START/PAUSE
button 2 times, is the drum low speed spin?
time after power off, press the START/PAUSE
button 2 times, is the drum low speed spin?
Is it disconnected, or disassembled?
[White : 3pin ( ), Red:3pin ( ),
Red:3pin ( ), National:4pin ( )]
[White : 3pin ( ), Red:3pin ( ),
Red:3pin ( ), National:4pin ( )]
Is it disconnected, or disassembled?
White : 3pin( ), White:4pin( )]
White : 3pin( ), White:4pin( )]
Check the motor connector, Is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
Resistance of terminal:
Replace the PWB assembly.
(2)
(1)
~
~
~
/
/
Click on the first or last page to see other WD-12400TDK service manuals if exist.