Read LG WD-12360FDB / WD-12360TD / WD-12361FD / WD-12366TD Service Manual online
19
NO
NO
YES
NO
NO
YES
NO
YES
YES
YES
NO
NO
YES
YES
YES
NO
NO
NO
YES
option (HOT)
option (HOT)
Is the water supply shut-off?
Is the tap opened?
Is the Inlet hose “A” part to be seen red color?
When you press both Bio button and Time Delay
button simultaneously, is the water level frequency
below 240?
button simultaneously, is the water level frequency
below 240?
Is the inlet valve filter clogged with impurity?
Is resistance of the inlet valve connector
between the 2 to 8
between the 2 to 8
k
Ω
?
Check the voltage between each terminals of
inlet Valve is 220 - 240V~.
(Refer to 7-2 TEST MODE)
inlet Valve is 220 - 240V~.
(Refer to 7-2 TEST MODE)
Is water supplied?
Are receptacles correctly connected to the
terminals of inlet valve?
terminals of inlet valve?
Is detergent put in the correct compartment of
the drawer?
the drawer?
Is the detergent caked or hardened?
Open the tap.
Visit to check
(Change the inlet hose)
(Change the inlet hose)
Check the chamber (Air)
and the tube clogged
with impurity.
and the tube clogged
with impurity.
Clean the filter.
Replace the inlet valve.
Replace PWB assembly
Refer to solution
NO INLET
Check the wiring on the
dispenser.
Put the detergent in the
correct position
correct position
PRE+MAIN
MAIN WASH
: Detergent
Clean the drawer.
NO WATER SUPPLY
DETERGENT DOES NOT FLOW IN
MAIN
WASH
SOFTENER
PRE -
WASH
Click on the first or last page to see other WD-12360FDB / WD-12360TD / WD-12361FD / WD-12366TD service manuals if exist.