Read LG WD-10391TD / WD-10391TDK / WD-10391TDP / WD-10721MDX Service Manual online
23
NO
YES
YES
YES
NO
NO
YES
NO
NO
YES
SPIN TROUBLE
Check the sensor
(Pressure) or hose
(Sensor).
If the problem is on the
sensor or the hose, replace
the sensor or the hose.
(Pressure) or hose
(Sensor).
If the problem is on the
sensor or the hose, replace
the sensor or the hose.
Normal
Correct the connector.
Correct the connector.
Replace the STATOR
assembly.
(4417EA1002D)
assembly.
(4417EA1002D)
While spinning, is the frequency of the
water level 248 or more? The frequency can be
checked by pressing the Intensive button
and Crease Care button at the same time
on the program.
water level 248 or more? The frequency can be
checked by pressing the Intensive button
and Crease Care button at the same time
on the program.
When pressing Spin button and Temp. button and
POWER button at the same time after power off,
POWER button at the same time after power off,
press the START/PAUSE button 2 times,
is the drum low speed spin?
Is it disconnected, or disassembled?
[White : 3pin ( ), Red:3pin ( ),
Red:3pin ( ), National:4pin ( )]
[White : 3pin ( ), Red:3pin ( ),
Red:3pin ( ), National:4pin ( )]
Is it disconnected, or disassembled?
White : 3pin( ), White:4pin( )]
White : 3pin( ), White:4pin( )]
Check the motor connector, Is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
Resistance of terminal:
Replace the PWB assembly.
(2)
(1)
~
~
~
/
/
Click on the first or last page to see other WD-10391TD / WD-10391TDK / WD-10391TDP / WD-10721MDX service manuals if exist.