WD-10380TB, WD-10385TB - LG Washing Machine Service Manual (repair manual). Page 30

① Remove the back cover.
② Take off the belt turning the pulley.
③ Unscrew the bolt to pull out the pulley.

① Unscrew 2 screws from the bracket.
② Push the motor in the arrow direction for disassembling

and take out it at the front of the washing machine.

③ When reassembling the motor, make sure that motor

mounting bushings are not taken off from the bracket.

① Pull out the hinge, pressing its snap.
② Do not use the pulled out hinge again. It may be taken

off during operation.

Hinge,
Damper

Damper

(PULLEY)

(MOTOR)

(DAMPER)

Open the lower cover cap (①) by
using a coin Turn the drain plug
(②) to pull out the hose.

Unplug the drain plug ( ② ) , then
the water flows out, 
At this time use a vessel 
to prevent water flowing on the
floor. If the water does not flow any
more,turn the pump filter ( ③ )
open to the left.

Take out any foreign material
from the pump filter ( ③ ). After
cleaning, turn the pump filter(③ )
clockwise and insert the
drain plug ( ② )to the original
place. close the lower cover cap.

1

100

2

3

2

3