Read LG WD-10234N / WD-10234T Service Manual online
28
①
① Remove the back cover.
②
②
② Take off the belt turning the pulley.
③
③
③ Unscrew the bolt to pull out the pulley.
①
① Unscrew 2 screws from the bracket.
②
②
② Push the motor in the arrow direction for
disassembling.
③
③ When reassembling the motor, make sure that motor
mounting bushings are not taken off from the bracket.
①
① Pull out the hinge, pressing its snap.
②
②
② Do not use the pulled out hinge again. It may be taken
off during operation.
PULLEY, MOTOR, DAMPER
(PULLEY)
(MOTOR)
(DAMPER)
Open the lower cover cap (
) by
using a coin. Turn the drain plug
(
(
) to pull out the hose.
Unplug the drain plug (
), then
the water flows out,
At this time use a vessel
to prevent water flowing on the
floor. If the water does not flow any
more,turn the pump filter (
At this time use a vessel
to prevent water flowing on the
floor. If the water does not flow any
more,turn the pump filter (
) open
to the left.
Take out any foreign material
from the pump filter (
from the pump filter (
). After
cleaning, turn the pump filter(
)
clockwise and insert the
drain plug (
drain plug (
)to the original
place. close the lower cover cap.
Clean the drain pump filter
1
100
2
3
2
3
Click on the first or last page to see other WD-10234N / WD-10234T service manuals if exist.