Read LG WD-10160FU / WD-10161F / WD-10162FU / WD-10165F / WD-10165FU Service Manual online
ERROR
SYMPTOM CAUSE
8
•
The electric contact between the connectors
(5-pin, male in the wire harness and 5-pin female in the hall sensor) is
bad or unstable.
ƒ_
Reconnect or repair the contact in the connector.
•
The connector (6-pin, male, natural) in the wire harness is not
connected to the connector (6-pin, female, natural) of PWB assembly
(Main) or the electric contact of connectors is bad/unstable.
ƒ_
Reconnect or repair the contact in the connector.
•
The electric contact between the connectors
¡a
6-pin, male in the wire
harness and 6-pin female in the controller (Main)
¡b
is bad or unstable.
ƒ_
Reconnect or repair the contact in the connector.
•
The wire harness between hall sensor in the MOTOR and PWB
assembly (Main) is cut (open circuited).
ƒ_
Repair/replace the damaged WIRE HARNESS.
•
The hall sensor is out of order/defective.
ƒ_
Replace the motor.
•
The controller (Main) is out of order/defective.
ƒ_
Replace the PWB assembly (Main).
SENSOR
ERROR
15
Click on the first or last page to see other WD-10160FU / WD-10161F / WD-10162FU / WD-10165F / WD-10165FU service manuals if exist.