Read LG TW8503DPE Service Manual online
10) Drainage fault during drainage time
Check
Check results
Possible reasons
Solution measures
<26。3KHz
Pressure sensor fault
Replace pressure fault
Pressure sensor
1 . Measure pressure
sensor frequency under
anhydrous condition.
26。3—27.1KHz
PC board fault
Replace PC board
11) SPIN while lid is open
Check
Check results
Possible reasons
Solution measures
Yes
Short-circuit
Remove magnetic objects
PC board
1. Are there magnetic
objects on PC board? No
reed switch is off
Replace PC board
12) Vibration, noise and unbalance during SPIN
Check
Check results
Possible reasons
Solution measures
Installation condition
1.Check if the washer is on a
flat surface.
Uneven
Poor installation
(Check clearance between outer
tub and body, washer and wall.
Make sure that clearance to the
right side and left side is the
same, clearance to the back is
1.5-2 times than that to the
front.
Install the washer on a flat
and firm surface
2.Check if clothes in the tub is
higher than the top row which
cause vibration and noise.
Yes Non-standard
clothing
placing
Explanation
3 . Check if wire wheel rotates
during SPIN (remove front lid and
pin for a cycle)
Wire wheel rotates
first
Clutch
flaw
Replace clutch reed or
clutch
Suspender
Yes
Suspender flaw
Replace four suspenders
(check the position during
installing)
1.Check if tub is in touch with
the roof under no load
“SPIN”.
*it is important to check type and source of noise, which is useful to gain maintenance experience.
35
Click on the first or last page to see other TW8503DPE service manuals if exist.