Read LG TW1103DPE / TW1203DPE Service Manual online
19
5
6
3
6
7
4
6
7
4
6
7
4
6
7
4
Close the lid
Finish
Caution & Note
• The pulsator rotates for
8 seconds to detect the
laundry load.
laundry load.
• Then the WATER
LEVEL and the amount
of Detergent to be
used will be shown and
water will be supplied.
of Detergent to be
used will be shown and
water will be supplied.
• Water will be let in
again 2 minutes
after the wash has
started to
supplement the
water the laundry
has absorbed.
after the wash has
started to
supplement the
water the laundry
has absorbed.
• When the wash
program ends, the
chime will sound
for 10 seconds
before the Power
goes off goes off
automatically.
chime will sound
for 10 seconds
before the Power
goes off goes off
automatically.
• If water is already in the tub, or putting
wet laundry into the tub before starting will
increase the WATER LEVEL.
increase the WATER LEVEL.
• With lightweight bulky loads, WATER
LEVEL can be set low.
• Changes to Water Temperature
(HOT/COLD) and wash level are possible
during operation.
(refer to page 12)
during operation.
(refer to page 12)
• When setting the WATER LEVEL manually,
do not set below level number 6 in order to
prevent damage to the woollen clothes.
prevent damage to the woollen clothes.
• Washing with HOT water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.
Ensure that the load is under 2kg.
• In order to avoid damage to laundry, the
spin cycle may appear slow.
This also avoids wrinkles and clothing may
still contain some water. This is normal.
This also avoids wrinkles and clothing may
still contain some water. This is normal.
• When static pressure of water is more
than 2kg/cm
2
, the QUICK WASH course
will be within 19min.
Click on the first or last page to see other TW1103DPE / TW1203DPE service manuals if exist.