Read LG T2028AFPS5 Service Manual online
9
2-3. CONNECT THE DRAIN HOSE
WARNING:
a. Bend the outlet end of the drain hose to form a U shape.
b. Insert the end of the drain hose into the drain. If the drain is large enough for the flange on the hose
to fit inside, then do not insert the flange more than 2.5~5.0cm into the drain.
c. Use the tie strap included with the installation
materials in the foam block in the tub to secure
the drain hose to the drain.
If the water valves and drain are
built into the wall, fasten the drain
hose to one of the water hoses with
the cable tie (ribbed side on inside).
If your drain is a standpipe, fasten
the drain hose to the standpipe with
the cable tie provided.
WARNING:
• The washer should never be installed or stored in a location subject to freezing temperatures. If the
washer was exposed to freezing temperatures prior to installation, allow it to stand at room
temperature for several hours before use. Damage to the water lines and internal mechanisms of
the washer can result.
• Water supply pressure must be between 100~1000 kPa ( 1.0~10.0 kgf/㎠ ) If the water supply
pressure is more 1000 kPa , a pressure reducing valve must be installed. If you have uncontrolled
water temperature and pressure you should fit a temperature and pressure relief valve to ensure
that water temperature and water pressure remain within the safe limits. Consult a plumber or
electrician if you are unable to adjust water temperature and or pressure. Failure to do so can result
in damage to the machine.
• Plug the power cord of washer into a properly grounded outlet. Failure to do this can result in shock
or serious injury.
Click on the first or last page to see other T2028AFPS5 service manuals if exist.