Read LG T1103TEDTM Service Manual online
34
3) Disassembly of Lid Assembly, Top
Cover, Tub Cover, Pulsator & Inner Tub
Remove Q-spring & two hinge pins then
disassemble the lid assembly
disassemble the lid assembly
Remove two top cover fixing screws in the rear
then disassemble the top cover.
then disassemble the top cover.
Remove tub cover fixing screws then disassemble
the tub cover.
the tub cover.
Remove the pulsator fixing screw then
disassemble the pulsator.
disassemble the pulsator.
Remove the hub fixing nut by a special tool.
Disassemble the inner tub.
4) Disassembly of Back Cover, Drain Pump,
Clutch(Transmission) & Motor
Remove back cover fixing screws then disassemble
the back cover.
the back cover.
Disconnect the leads and the drain hose-p from the
drain pump.
drain pump.
Remove the pump fixing screws then
disassemble the drain pump.
disassemble the drain pump.
Fall down the washer for clutch & motor removal.
Remove the belt.
Disassemble the clutch.
Remove two motor fixing screws then
disassemble the motor.
disassemble the motor.
5) Replacement of Damper asm
Separate top cover from washing machine.
As in the fig, lift snubber bar and take it out of out
case with out tub.
case with out tub.
Damper assembly shall not be disassembled.
Replace damper as assembly.
Replace damper as assembly.
For assembly, keep the following.(Location & color)
Location P/No. PIVOT(Color)
A051 NATURAL
A052 BLUE
Tub cover
Pulsator
Inner tub
Hub fixing nut
Leads
Drain hose-p
Pump fixing screw
Click on the first or last page to see other T1103TEDTM service manuals if exist.