Read LG F8068QDP Service Manual online
Symptom
Possible Cause
Solution
• Load is too small.
• Load is out of balance.
• The appliance has an imbalance detection
• Load is out of balance.
• The appliance has an imbalance detection
and correction system. If individual heavy
articles are loaded (ex. bath mat, bath robe,
etc.) this system may stop spinning or even
interrupt the spin cycle altogether.
articles are loaded (ex. bath mat, bath robe,
etc.) this system may stop spinning or even
interrupt the spin cycle altogether.
• If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
balance the load and repeat the spin cycle.
• Water supply is not adequate in area.
• Water supply taps are not completely open.
• Water inlet hose(s) are kinked.
• The filter of the inlet hose(s) are clogged.
• Water supply taps are not completely open.
• Water inlet hose(s) are kinked.
• The filter of the inlet hose(s) are clogged.
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.
Clean and straighten the drain hose.
Clean the drain filter.
Clean the drain filter.
Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper
spinning
balance the load.
Rearrange load to allow proper
spinning
Close the door.
If it is not released, call for service.
If it is not released, call for service.
Unplug the power plug and call for
service.
service.
Close the water tap.
Unplug the power plug.
Call for service.
Unplug the power plug.
Call for service.
• Drain hose is kinked or clogged.
• The drain filter is clogged.
• The drain filter is clogged.
• Is the door opened?
• Water overfills due to the faulty water valve.
• Water level sensor has malfunctioned.
24
F**68*D(P)
25
Click on the first or last page to see other F8068QDP service manuals if exist.