F1256QD, F1256QD1, F1256QD2, F1256QD5 - LG Washing Machine Service Manual (repair manual). Page 10

Read LG F1256QD / F1256QD1 / F1256QD2 / F1256QD5 Service Manual online

10
Check the horizontality with a level (Gage).
8
1 Step
If washing machine legs are loose or not screwed, then 
screw up
with the spanner wrench. 
Using the level, level the washing machine from front to back and side to side.
2 Step
Using the spanner wrench to adjust leg for 
horizontality
and try for 
Diagonal test
.
3 Step
Perform a Rinse and Spin with some clothing in the machine.
To do this, put 2~3kg of clothing in the unit, power on the unit, press the Rinse and Spin 
button, and then start. When the unit reaches the spin cycle, watch for vibrations.
If the unit is vibrating, make small adjustments to the leg until they subside. (Try 2Step again)
4 Step
Tighten
the lock nut against the base of the machine to 
lock
the 
position leg
.
Lower the foot until there is no gap between floor and foot.
And only use 
adjustment rubber
when difference at the leg adjustment is more than 
10mm
.
Place your right hand on the back, right corner and your left hand on the front,
left corner of the unit, then attempt to rock the unit from corner to corner.
Then, move your right hand to the front, right side and your left hand to the
back, left corner and attempt to rock the unit from corner to corner.
If the unit is level, it will not rock.  However, if the unit is not level, it will rock.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.
How to perform a diagonal test:
A level
Higher
Tighten
Adjustable feet
Diagonal test
Tighten
Adjustable feet
Higher
Tighten
Adjustable feet
Lower
Lock nut
10mm
Adjustable bolt
Tighen the lock nut
4620ER3001B
(Gray)
for Wooden floors
Rubber Cup
4620ER3001A
(Black)
for Tile floors
Page of 44
Display

Click on the first or last page to see other F1256QD / F1256QD1 / F1256QD2 / F1256QD5 service manuals if exist.