Read LG F1252RD2 Service Manual online
23
1
2
3
1
2
3
NO WATER SUPPLY
DETERGENT DOES NOT FLOW IN
Is water supplied?
Are receptacles correctly connected to the
erminals of the INLET VALVE ASSEMBLY?
erminals of the INLET VALVE ASSEMBLY?
Has detergent been put in the correct compartment
of the dispenser?
of the dispenser?
Is the detergent caked or hardened?
Is water supply shut-off?
Is the tap opened?
When you press both SPIN button and RINSE
button simultaneously, is the water level frequency
below 246?
button simultaneously, is the water level frequency
below 246?
Open the tap.
Check the AIR CHAMBER
and the tube (clogged).
and the tube (clogged).
Clean the filter.
Replace the INLET VALVE
ASSEMBLY.
ASSEMBLY.
Check electrical connection.
Replace the MAIN PWB
ASSEMBLY.
Replace the MAIN PWB
ASSEMBLY.
Refer to
NO WATER SUPPLY
Check the wiring.
Put the detergent in the
correct place.
correct place.
Clean the dispenser.
Detergent
Pre wash Main wash
Is the inlet valve filter clogged?
Is resistance between each terminal of INLET
VALVE ASSEMBLY 0.8-1.2
?
Verify the voltage of the inlet valve connector is
220-240V AC.
(Refer to 7-2 QC TEST MODE)
FOR AUTHORIZED SERVICE TECHNICIAN
Click on the first or last page to see other F1252RD2 service manuals if exist.