610192 - LG Washing Machine Service Manual (repair manual). Page 17

Before servicing ask the customer what the trouble is.
Check the adjustments. (Power supply :220-240 V~, Removal of transit bolts etc..)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works OK or NOT.

7. TROUBLESHOOTING

7-1. CHECK BEFORE SERVICE

7-2. LOAD TEST MODE

1 Touch and Hold ‘Temp.’ & ‘Rinse’ buttons

and then press ‘Power’ button.

2 The washer must be empty and the controls must be in the off state.

3 Press Power with above two buttons pressed and then buzzer will sound.

4 Press the Start/Pause button repeatedly to cycle through the test modes

MODEL : F1695RDH (1~9)

1

2

3

4
5
6

Display Status

Remark

Check Point

Numberof times the

Start/Pause in Pressed

0

1 

2 

3 

4

5 

6 

7 

8 

9 

10 

11

12 

13

14  

15

Turns on all light and locks the door.

Tumble clockwise

Low speed spin

High speed spin

Inlet valve for prewash turns on.

Inlet valve for main wash turns on.

Inlet valve for hot water turns on.

Inlet valve for Dry valve turns on.

Inlet valve for steam turns on.

Inlet valve for Filter Cleaning valve turns on.

Tumble counterclockwise

Heater turns on for 3 sec.

Circulation pump turns on.

Drain pump turns on.

Dry fan/ Dry Heater turns on

Off

QE TEST MODE

rpm(42~50)

rpm (55~65)

rpm (125~155)

Water level frequency (25~65)

Water level frequency (25~65)

Water level frequency (25~65)

Water level frequency (25~65)

Water level frequency (25~65)

Water level frequency (25~65)

rpm(42~50)

Water temperature

Water level frequency (25~65)

Water level frequency (25~65)

Dry Fan/Dry Heater 5min

-

3in2