48842800 - LG Washing Machine Service Manual (repair manual). Page 14

MY CYCLE allows you to store a frequently used wash cycle for easy selection and use. It
allows you to save favorite temperature, spin speed, soil level and other options for a cycle
and then recall them at the touch of a button.

To store My CYCLE :
1. Select a cycle.
2. Adjust the Wash/Rinse Temperature, Spin Speed and Soil Level to the desired setting.
3. Set anyother desires optiions.
4. Press and hold the MY CYCLE button for 3 seconds. You will hear two beeps to confirm

the settings have been stored.

INPORTANT : If you press and hold the MY CYCLE button for 3 seconds, you will overwrite

any previously stored MY CYCLE.

To recall MY CYCLE :
1. Press and release the MY CYCLE button. The stored settings will be displayed.
2. Press and release the START/PAUSE button to start the cycle. The washer will start

automatically.

NOTE : Once the MY CYCLE has been recalled, any of the memorized modifiers or options

can be adjusted. However, if the Cycle Select Knob is rotateed, the MY CYCLE will
be canceled and the dial selection will be displayed.

5-3. SPECIAL FUNCTIONS

The option buttons also activate special functions, including CHILD LOCK, CLEAN WASHER and MY CYCLE.
Press and hold the option button marked with the special function for 3 seconds to activate.

Use this option to prevent unwanted use of the washer or to keep cycle settings from being
changed while the washer is operating. Press and hold the SOIL LEVEL and CYCLE
SIGNAL buttons for 3 seconds to activate or deactivate CHILD LOCK. CHILD LOCK will be
shown in the display, and all controls are disabled. The washer can be locked during a cycle.
Once CHILD LOCK is selected, the display will alternate between CL and the estimated time
remaining. 

A buildup of detergent residue can occur in the wash tub over time and can lead to a mildewy
or musty smell. The CLEAN WASHER cycle is specially designed to remove this buildup.
The CLEAN WASHER cycle should be run once a month, or more often under heavy use
conditions or if odor is present.
1. Press and hold the EASY SPIN button for 3 seconds to activate this cycle.
2. Fill the bleach dispenser to the MAX line with liquid chlorine bleach.
3. Press the Cycle Selector Knob to start the cycle.
4. After the cycle has ended, open the door and allow the drum interior to dry completely.

NOTE: Do NOT use this cycle withclothes, and do NOT add detergent or fabric softener.