Read LG 42192 Service Manual online
CLEAN WASHER
A buildup of detergent residue can occur in the wash tub over time and can lead to a mildewy or musty smell.
The CLEAN WASHER cycle is specially designed to remove this buildup using bleach or other cleaner
designed specifically for cleaning front load washers.
The CLEAN WASHER cycle should be run once a month, or more often under heavy use conditions or if
odor is present.
The CLEAN WASHER cycle is specially designed to remove this buildup using bleach or other cleaner
designed specifically for cleaning front load washers.
The CLEAN WASHER cycle should be run once a month, or more often under heavy use conditions or if
odor is present.
For powdered tub cleaners, add the cleaner to the main wash compartment of the dispenser drawer. Place
tablet cleaners directly into the tub. Always follow the cleaner manufacturers instructions and
Recommendations
tablet cleaners directly into the tub. Always follow the cleaner manufacturers instructions and
Recommendations
NOTE:
Do NOT use this cycle with clothes, and do NOT add detergent or fabric softener.
MY CYCLE
SMART SENSE
DRUM LIGHT
The drum is equipped with a blue LED light that illuminates when the washer is turned ON.
This light automatically turns OFF when the door is closed and the cycle starts. To turn ON the light during a
cycle, press and hold AUTO SOAK button for 3 seconds. The drum light will illuminate and then turn OFF
automatically after 4 minutes.
This light automatically turns OFF when the door is closed and the cycle starts. To turn ON the light during a
cycle, press and hold AUTO SOAK button for 3 seconds. The drum light will illuminate and then turn OFF
automatically after 4 minutes.
CONTROL LOCK
Use this option to disable the controls. The washer can be locked during a cycle. This feature allows you to
prevent children from changing cycles or operating the machine. Once set, the CONTROL LOCK must be
turned off before the controls can be used. Once the washer has shut off, the power button will allow the
machine to be turned on, but the controls will still be locked. When the controls are locked, "CL" will be
displayed alternately with the estimated time remaining. Press and hold the CONTROL LOCK button for
5 seconds to activate or deactivate the controls.
prevent children from changing cycles or operating the machine. Once set, the CONTROL LOCK must be
turned off before the controls can be used. Once the washer has shut off, the power button will allow the
machine to be turned on, but the controls will still be locked. When the controls are locked, "CL" will be
displayed alternately with the estimated time remaining. Press and hold the CONTROL LOCK button for
5 seconds to activate or deactivate the controls.
Select this option to store a customized wash cycle for future use.
1. Select a cycle.
2. Press the desired options.
3. Press the desired modifiers.
4. To save the cycle press MY CYCLE.
5. Press the START/PAUSE.
6. To reuse this cycle at another time, select MY CYCLE and press the START/PAUSE
1. Select a cycle.
2. Press the desired options.
3. Press the desired modifiers.
4. To save the cycle press MY CYCLE.
5. Press the START/PAUSE.
6. To reuse this cycle at another time, select MY CYCLE and press the START/PAUSE
This feature uses a sensor in the tub to check the hardness of the water and the detergent amount. Wash and
rinse cycles will be adjusted to optimize wash and rinse performance.
To use the SMART SENSE feature press and hold 2nd RINSE button for 3 seconds.
Excessive detergent amount: rinsing cycle increase.
Insufficient detergent amount: washing time increase.
A small amount of remaining detergent detected: additional rinsing will be added.
rinse cycles will be adjusted to optimize wash and rinse performance.
To use the SMART SENSE feature press and hold 2nd RINSE button for 3 seconds.
Excessive detergent amount: rinsing cycle increase.
Insufficient detergent amount: washing time increase.
A small amount of remaining detergent detected: additional rinsing will be added.
1 6
5-4. SPECIAL FUNCTION
Click on the first or last page to see other 42192 service manuals if exist.