Read LG 41182 Service Manual online
17
5-5. EXPLANATION OF EACH PROCESS
No.
Process
Explanation
1.
Stay
Electrical power is supplied
Washer is ready to work and the micom is in the active mode.
Washer is ready to work and the micom is in the active mode.
2.
Water
supply
supply
After loading laundry and selecting a course and a cycle, water is
supplied and drum rotates.
When a user selects Pre-wash course, water is supplied through
pre wash valve.
3.
Soaking
& washing
laundry
& washing
laundry
To get laundry wet, drum rotates clockwise and counterclockwise.
If water amount is insufficient at this time, the Inlet valve will supply
If water amount is insufficient at this time, the Inlet valve will supply
water again.
4
Washing
Fuzzy Logic decides washing time according to the laundry load, water
temperature, and other factors.
5.
Drainage
A pump motor drains the water from the drum.
After sensing drained water amount by water level frequency, spin starts.
When a heating course is selected, stay cooling process is performed to
After sensing drained water amount by water level frequency, spin starts.
When a heating course is selected, stay cooling process is performed to
decrease the water temperature gradually to prevent laundry from being
damaged and for safety reasons.
damaged and for safety reasons.
6.
Untangling
(Sensing
eccent-
ricity)
(Sensing
eccent-
ricity)
It balances laundry load and senses the eccentricity of the load, to only
allow spinning without vibration
If the eccentricity is worse than the allowed level, it repeats the
disentangling process. When the repeated time is more than allowed
level, it displays UE.
level, it displays UE.
If the eccentricity is good, the intermittent spin starts.
During this process, the drain pump works for drainage intermittently.
During this process, the drain pump works for drainage intermittently.
Click on the first or last page to see other 41182 service manuals if exist.