Read LG 31412 Service Manual online
26
8) Disassembly of Rotor and Stator
①
Use a wrench (M24) to remove the nut that
connects the rotor to the shaft.
(The torque should be 200 kgf/cm or 88 foot-
pounds.)
②
Remove the rotor by pulling it straight off the
splined shaft.
6) Disassembly of the Back Cover and
Drain Pump
①
Remove the screws that attach the back cover and
take it off.
②
Disconnect the leads and the drain hose from the
drain pump.
③
Remove the pump attachment screws and the lead
connector. Take the pump assembly out of the
washer.
8) Disassembly of Damper Assembly
①
Remove the top cover and the back cover of the
washing machine.
②
Pull out the hinge which connect the horizontal
damper with outer tub.( To disassembly the
horizontal damper, take the horizontal damper out
of the holder.)
③
As shown in the drawing, lift the damper assembly
and remove it along with the outer tub assembly.
④
Damper assembly shall not be disassembled.
Replace damper as assembly.
Click on the first or last page to see other 31412 service manuals if exist.