Read LG 70LA8600-SA (CHASSIS:LJ34D) Service Manual online
- 14 -
ADJUSTMENT INSTRUCTION
1. Application Range
This specification sheet is applied all of the LJ34D LED TV
models, which produced in manufacture department or similar
LG TV factory
2. Designation
(1) The adjustment is according to the order which is
designated and which must be followed, according to the
plan whic al Unit: Product Specification Standard.
(2) Power adjustment : Free Voltage.
(3) Magnetic Field Condition: Nil.
(4) Input signal Unit: Product Specification Standard.
(5) Reserve after operation: Above 5 Minutes (Heat Run).
Temperature : at 25 ºC±5 ºC
Relative humidity : 65 ± 10%
Input voltage : 100~220V, 50/60Hz
(6) Adjustment equipments : Color Analyzer (CA-210 or
CA-110), SVC remote controller
(7) Push The “IN STOP KEY” – For memory initialization.
3. Main PCB check process
3.1. Main PCBA Adjustments
(1) ADC adjustment: Component 480i, 1080p / RGB-PC 1080p
(2) EDID downloads for HDMI and RGB-PC
(3) MAC Address / ESN / Widevine Download
※ Remark
- Above adjustment items can be also performed in Final
Assembly if needed. Adjustment items in both PCBA and
final assembly stages can be checked by using the INSTART
Menu → 1.ADJUST CHECK
3.2. Final Assembly adjustment
(1) White Balance adjustment
(2) RS-232C functionality check
(3) Factory Option setting per destination
(4) Shipment mode setting (IN-STOP)
(5) GND and HI-POT test
* After downloading, have to adjust TOOL OPTION again.
(1) Push "IN-START" key in service remote controller.
(2) Select "Tool Option 1" and Push “OK” button.
(3) Punch in the number. (Each of models has their number.)
[See the BOM]
(4) Completed selecting Tool option.
● Tool option
Model
Module
Tool
option1
Tool
option2
Tool
option3
Tool
option4
Tool
option5
Tool
option6
Tool
option7
47LA8600-SA
LGD
32981
53793
30393
37085
47514
1359
47243
55LA7900-SA
LGD
32967
53793
30393
37085
47510
1359
47243
55LA8600-SA
LGD
32983
53793
30393
37085
47514
1359
47243
60LA8600-SA
LGD
32984
53793
30393
37085
47258
1359
48267
70LA8600-SA
SHARP
39129
53793
5817
37085
47254
1359
47243
3.3. ADC Process
ADC calibration is not necessary because MAIN SoC
(LGExxxx) is already calibrated from IC Maker
3.3.2. Manual ADC Calibration
3.3.2.1. Equipment & Condition
(1) Adjustment Remocon
(2) 801GF (802B, 802F, 802R) or MSPG925FA Pattern
Generator
- Resolution: 480i Comp1 (MSPG-925FA: model-209,
pattern-65)
- Resolution: 1080p Comp1 (MSPG-925FA: model-225,
pattern-65)
- Resolution : 1080p RGB (MSPG-925FA: model-225,
pattern-65)
- Pattern : Horizontal 100% Color Bar Pattern
- Pattern level: 0.7±0.1 Vp-p
Case1 : Software version up
1) After downloading S/W by USB , TV set will reboot
automatically
2) Push “In-stop” key
3) Push “Power on” key
4) Function inspection
5) After function inspection, Push “In-stop” key.
Case2 : Function check at the assembly line
1) When TV set is entering on the assembly line, Push
“In-stop” key at first.
2) Push “Power on” key for turning it on.
=> If you push “Power on” key, TV set will recover channel
information by itself.
3).After function inspection, Push “In-stop” key.
Click on the first or last page to see other 70LA8600-SA (CHASSIS:LJ34D) service manuals if exist.