Read LG 60PV250-ZA / 60PV250A-ZA / 60PV250K-ZA / 60PV250N-ZA (CHASSIS:PD11K) Service Manual online
- 12 -
* Manual Download (Model Name and Serial Number)
- If the TV set is downloaded By OTA or Service man,
Sometimes model name or serial number is initialized.(
Not always)
Not always)
- There is impossible to download by bar code scan, so It
need Manual download.
1) Press the ‘instart’ key of ADJ remote controller.
2) Go to the menu ‘5.Model Number D/L’ like below photo.
3) Input the Factory model name(ex 42LD450-TA) or Serial
2) Go to the menu ‘5.Model Number D/L’ like below photo.
3) Input the Factory model name(ex 42LD450-TA) or Serial
number like photo.
4) Check the model name Instart menu ? Factory name
displayed (ex 42LD450-TA)
5) Check the Diagnostics (DTV country only) ? Buyer
model displayed (ex 42LD450)
12. CI+ Key Download
12-1. Download Procedure
(1) Press "Power on" button of a service R/C.(Baud rate :
115200 bps)
(2) Connect RS232-C Signal Cable.
(3) Write CI+ Key through RS-232-C.
(4) Check whether the key was downloaded or not at ‘In Start’
(3) Write CI+ Key through RS-232-C.
(4) Check whether the key was downloaded or not at ‘In Start’
menu. (Refer to below)
-> Check the Download to CI+ Key value in LGset.
12-2. Check the method of CI+ Key value
(1) check the method on Instart menu
(2) check the method of RS232C Command
1) into the main ass
’y mode (RS232 : aa 00 00)
2) check the key download for transmitted command
(RS232 : ci 00 10)
3) result value
- normally status for download : OKx
- abnormally status for download : NGx
- abnormally status for download : NGx
12-3. Check the method of CI+ Key value
(RS232)
(1) into the main ass
’y mode (RS232 : aa 00 00)
(2) Check the mothed of CI+ key by command
(RS232 : ci 00 20)
(3) result value
CMD 1
CMD 2
Data 0
A
A
0 0
CMD 1
CMD 2
Data 0
C
1
1 0
CMD 1
CMD 2
Data 0
A
A
0 0
CMD 1
CMD 2
Data 0
C
1
2 0
Click on the first or last page to see other 60PV250-ZA / 60PV250A-ZA / 60PV250K-ZA / 60PV250N-ZA (CHASSIS:PD11K) service manuals if exist.