Read LG 60PT200C-WA / 60PT200N (CHASSIS:PC11A) Service Manual online
(2) Va adjustment (refer fig.1)
1) After receiving 100% Full White Pattern, HEAT RUN.
2) Connect + terminal of D.M.M. to Va pin of
2) Connect + terminal of D.M.M. to Va pin of
P812(42”:P811), connect -terminal to GND pin of
P811(42”:P812).
P811(42”:P812).
3) After turning VR502,voltage of D.M.M adjustment as
same as Va voltage which on label of panel left/top
(deviation; ±0.5V)
(deviation; ±0.5V)
11. Default Service option.
11-1. ADC-Set
.
V
R-Gain adjustment Value (default 128)
V
G-Gain adjustment Value (default 128)
V
B-Gain adjustment Value (default 128)
V
R-Offset adjustment Value (default 128)
V
G-Offset adjustment Value (default 128)
V
B-Offset adjustment Value (default 128)
11-2. White balance. Value.
11-3. Temperature Threshold
V
Threshold Down Low
20
V
Threshold Up Low
23
V
Threshold Down High 70
V
Threshold Up High
75
12. USB DOWNLOAD
(*.epk file download)
V
Put the USB Stick to the USB socket
V
Press Menu key, and move OPTION
V
Press “FAV” Press 7 times.
V
Select download file (epk file)
V
After download is finished, remove the USB stick.
V
Press “IN-START” key of ADJ remote control, check the
S/W version.
S/W version.
- After downloading, have to adjust TOOL OPTION again.
1. Push "IN-START" key in service remote controller.
2. Select "Tool Option 1" and Push “OK” button.
3. Punch in the number. (Each of models has their number.)
4. Completed selecting Tool option.
1. Push "IN-START" key in service remote controller.
2. Select "Tool Option 1" and Push “OK” button.
3. Punch in the number. (Each of models has their number.)
4. Completed selecting Tool option.
- 12 -
CENTER (DEFAULT)
Cool
Mid
Warm
R Gain
192
192
192
G Gain
192
192
192
B Gain
192
192
192
R Cut
64
64
64
G Cut
64
64
64
B Cut
64
64
64
Model
60PT100C-WA
60PT200C- WA
Module
60C2
60C2
Tool Option1
49440
49440
Tool Option1
16902
16902
Tool Option1
128
128
Tool Option1
0
0
Tool Option1
65
64
Click on the first or last page to see other 60PT200C-WA / 60PT200N (CHASSIS:PC11A) service manuals if exist.