60PT100C-WA, 60PT100N (CHASSIS:PC11A) - LG TV Service Manual (repair manual). Page 9

- Analog EDID table(HD)

* See Working Guide if you want more information about EDID

communication.

(1) Using Instruments

1) Color Analyzer: CA-210 (CH 9)

- Using LCD color temperature, Color Analyzer (CA-

210) must use CH 9, which Matrix compensated
(White, Red, Green, Blue compensation) with CS-
2100. See the Coordination bellowed one. 

2) Auto-adjustment Equipment (It needs when Auto-

adjustment – It is availed communicate with RS-232C :
Baud rate: 115200) 

3) Video Signal Generator MSPG-925F 720p, 216Gray

(Model: 217, Pattern 78)

(2) Connection Diagram (Auto Adjustment)

1) Connection with Jig set

- Connect with the Jig set before White Balance

Adjustment all the time

- Change the Instart Menu in Jig set as the below

1) Move the cursor on “16. MV Option”
2) Move right and the cursor on “3. Jig Set”
3) Change “Off” to “On”

2) Using Inner Pattern

3) Using HDMI input

(3) White Balance Adjustment 

- If you can’t adjust with inner pattern, then you can adjust

it using HDMI pattern. You can select option at “Ez-Adjust
Menu – 7. White Balance” there items “NONE, INNER,
HDMI”. It is normally setting at inner basically. If you can’t
adjust using inner pattern you can select HDMI item, and
you can adjust.

- In manual Adjust case, if you press ADJ button of service

remocon, and enter “Ez-Adjust Menu – 7. White Balance”,
then automatically inner pattern operates. (In case of
“Inner” originally “Test-Pattern. On” will be selected in The
“Test-Pattern. On/Off”. 

O

Connect all cables and equipments like Pic.5)

O

Set Baud Rate of RS-232C to 115200. It may set
115200 orignally.

O

Connect RS-232C cable to set

O

Connect HDMI cable to set

- 9 -

< Connection Diagram for Adjustment White balance >