Read LG 55LW9800-CA (CHASSIS:LC12D) Service Manual online
Surrounding lighting should be lower 10 lux. Try to isolate adj. area into dark surrounding.
2) Probe location
- PDP: Color Analyzer (CA-100, CA-100+, CA210) probe should be firmly attached to the
Module
- LCD: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the
Module
- LCD: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the
module surface (80°~ 100°)
3) Aging time
- After Aging Start, Keep the Power ON status during 5 Minutes.
- In case of LCD, Back-light on should be checked using no signal or Full-white pattern.
5.3.6 Reference (White Balance Adj. coordinate and color temperature)
▪ Luminance: 216 Gray
▪ Standard color coordinate and temperature using CS-1000 (over 26 inch)
▪ Luminance: 216 Gray
▪ Standard color coordinate and temperature using CS-1000 (over 26 inch)
Coordinate
Mode
x
y
Temp
△
uv
Cool
0.269 0.273 13000K 0.0000
Medium 0.285 0.293 9300K 0.0000
Warm 0.313 0.329 6500K 0.0000
▪ Standard color coordinate and temperature using CA-210(CH 14)
Coordinate
Mode
x
y
Temp
△
uv
Cool
0.269±0.002 0.273±0.002
13000K
0.0000
Medium 0.285±0.002 0.293±0.002 9300K
0.0000
Warm 0.313±0.002 0.329±0.002 6500K
0.0000
5.3.7 ALELF&EDGE LED White balance table
▪ Edge LED module change color coordinate because of aging time
▪ apply under the color coordinate table, for compensated aging time
ALEF (
47/55LW9800, 42/47/55LW7700
)
Aging time
Cool
Medium
Warm
(Min)
x
y
x
y
x
y
GP3
269
273
285
293
313
329
1
0-2
282 294 298 314 322 343
2
3‐5
281 292 297 312 321 341
- 22 -
Click on the first or last page to see other 55LW9800-CA (CHASSIS:LC12D) service manuals if exist.