Read LG 55LEX8-SA (CHASSIS:LJ03S) Service Manual online
O
Notice) Adjustment Mapping information
• When Color temperature (White balance) Adjustment
(Automatically)
- Press “Power only key” of service remocon and operate
automatically adjustment.
- Set BaudRate to 115200.
• If it needs, then adjustment “Offset”.
A
White Balance Adjustment (Manual adjustment)
• Test Equipment: CA-210
- Using LCD color temperature, Color Analyzer (CA-210)
must use CH 9, which Matrix compensated (White, Red,
Green, Blue compensation) with CS-2100. See the
Coordination bellowed one.
Green, Blue compensation) with CS-2100. See the
Coordination bellowed one.
• Manual adjustment sequence is like bellowed one.
- Turn to “Ez-Adjust” mode with press ADJ button of
service remocon.
- Select “10.Test Pattern” with CH+/- button and press
enter. Then set will go on Heat-run mode. Over 30
minutes set let on Heat-run mode.
minutes set let on Heat-run mode.
- Let CA-210 to zero calibration and must has gap more
10cm from center of LCD module when adjustment.
- Press “ADJ” button of service remocon and select
“7.White-Balance” in “Ez-Adjust” then press “
G
” button
of navigation key.
(When press “
G
” button then set will go to full white
mode)
- Adjust at three mode (Cool, Medium, Warm)
- If “cool” mode
- If “cool” mode
Let B-Gain to 192 and R, G, B-Cut to 64 and then
control R, G gain adjustment High Light adjustment.
control R, G gain adjustment High Light adjustment.
- If “Medium” and “Warm” mode
Let R-Gain to 192 and R, G, B-Cut to 64 and then
control G, B gain adjustment High Light adjustment.
control G, B gain adjustment High Light adjustment.
- All of the three mode
Let R-Gain to 192 and R, G, B-Cut to 64 and then
control G, B gain adjustment High Light adjustment.
control G, B gain adjustment High Light adjustment.
- With volume button (+/-) you can adjust.
- After all adjustment finished, with Enter (
- After all adjustment finished, with Enter (
A
key) turn to
Ez-Adjust mode. Then with ADJ button, exit from
adjustment mode
adjustment mode
Attachment: White Balance adjustment coordination and
color temperature.
• Using CS-1000 Equipment.
- COOL : T=11000K,
∆
uv=0.000, x=0.276 y=0.283
- MEDIUM : T=9300K,
∆
uv=0.000, x=0.285 y=0.293
- WARM : T=6500K,
∆
uv=0.000, x=0.313 y=0.329
• Using CA-210 Equipment. (9 CH)
- Contrast value: 216 Gray
- White Balance adjustment coordination and color
temperature for Edge(IOP) LED (LJ03D/E)
-White Balance adjustment table for Edge (IOP) LED
(LJ03D/E/R-for LX6500)
-LGD 3D IOP LED (for LX9500)
- 16 -
Cool
Medium
Warm
X
y
x
y
x
y
GP2
Aging time
(Min)
269
273
285
293
313
329
1
0-2
280 291 296 311 319 340
2
3-5
278 288 294 308 317 338
3
6-9
276 285 292 305 315 335
4 10-19
274 282 290 302 313 332
5 20-35
273 279 289 299 312 329
6 36-49
270 276 287 296 310 326
7 50-79
269 273 286 293 308 323
8 Over
80 269 273 285 293 308 323
Aging time
Cool
Medium
Warm
(Min)
x
y
x
y
x
y
GP2
269
273
285
293
313
329
1 0-2 287 301 303 321 326 351
2 3-5 286 299 302 319 325 349
3 6-9 285 297 301 317 324 347
4 10-19 283 295 299 315 322 345
5 20-35 281 291 297 311 320 341
6 36-49 277 285 293 305 316 335
7 50-79 273 281 289 301 312 331
8 80-149
271 277 287 297 310 327
9
Over
150
269 273 285 293 308 323
Click on the first or last page to see other 55LEX8-SA (CHASSIS:LJ03S) service manuals if exist.