Read LG 50PZ570G-ZB / 50PZ570S-ZB / 50PZ575S-ZB (CHASSIS:PD12C) Service Manual online
- 9 -
* Auto-control interface and directions
(1) Adjust in the place where the influx of light like floodlight
around is blocked. (Illumination is less than 10ux).
(2) Measure and adjust after sticking the Color Analyzer (CA-
100+, CA210 ) to the side of the module.
(3) Aging time
After aging start, keep the Power on (no suspension of
power supply) and heat-run over 5 minutes
power supply) and heat-run over 5 minutes
4-4. Serial number download & Model
name D/L and Check Tool Option.
(1) Press "Power on" button of a service R/C.(Baud rate :
115200 bps)
(2) Connect RS232-C Signal Cable and start ‘Option Check
Program Ver3.8’
(3) Scan serial Number and press ‘F5’ button.
(4) Check ‘OK’ on program (1) program.
(5) Press ‘In start’ button on SVC R/C, check Serial Number
(4) Check ‘OK’ on program (1) program.
(5) Press ‘In start’ button on SVC R/C, check Serial Number
and Model Name.
4-5. Check Tool Option and write Country
Group & Area Code(Option) D/L
4-6. Checking the EYE-Q Operation.
(1) Press the EYE Key on the adjustment remote controller.
(2) Check the Sensor DATA ( It must be under 10) and keep
(2) Check the Sensor DATA ( It must be under 10) and keep
the data longer than 1.5s
(3) Check ‘OK’
(Sensor DATA 0 ~ 4095, Power Saving Mode 0 ~ 12)
* IF you press IN-STAP Button, change Green Eye-check OSD.
* IF you press IN-STAP Button, change Green Eye-check OSD.
4-7. Ping TEST
* This test is to check Network operation.
(1) Equipment Setting
1) Play the LAN Port Test PROGRAM.
2) Input IP set up for an inspection to Test
2) Input IP set up for an inspection to Test
*IP Number : 12.12.2.2
(2) LAN PORT inspection (PING TEST)
* In this case Network setting is on Manual Setting.
1) Play the LAN Port Test Program.
2) connect each other LAN Port Jack.
3) Play Test (F9) button and confirm OK Message.
4) remove LAN CABLE
2) connect each other LAN Port Jack.
3) Play Test (F9) button and confirm OK Message.
4) remove LAN CABLE
(3) Check Wireless function.
1) Connect set and Dongle of Wireless to Cable of HDMI &
TTA 20Pin
2) At OSD of SET, check the message like Fig 3.
3) Detach Cable of Wireless Dongle
3) Detach Cable of Wireless Dongle
Model Name
PZ950S/G PZ750S/G PZ570S/G
Tool Option 1
50 INCH
32777
32793
32809
60 INCH
32781
32797
32813
Tool Option 2
50 INCH
65
130
195
60 INCH
65
130
195
Tool option 3
19807
19807
19807
Tool option 4
8016
8016
8016
Tool option 5
14921
14921
14920
Tool option 6
857
857
857
Area option / Code
0
0
0
Click on the first or last page to see other 50PZ570G-ZB / 50PZ570S-ZB / 50PZ575S-ZB (CHASSIS:PD12C) service manuals if exist.