Read LG 50PT255C-TA (CHASSIS:PP11K) Service Manual online
LGE Display Division LG(51)
Establish : 2009-08-17
Reform : 2009-09-28
PP01A/B/C
Adjust Specification
19/
30
5.2
Adjustment of Area option.
5.2.1 Area Option Adjustment following BOM ( Including SKD models )
Tool Option
Area Option
Option 1
Option 2
Option 3 ( Available for EU & Non EU model )
Option 1
Option 2
Option 3 ( Available for EU & Non EU model )
LGE
* Profile : Must be changed the option value because being different with some setting value
depend on module, inch and market
* Equipment : adjustment remote controller
1)
Push the IN-START key in the Adjust R/C.
2)
Enter Password number. The value of Password is “0 0 0 0”.
3)
Input the Area Option Number that was specified in the BOM, into the Shipping area.
4)
Select “
Area Option
” by using ▲/▼(CH+/-) key , and press the number key(0~9)
consecutively
ex) If the value of Area
Option
is 40, input the data using number key “40”
(Fig. 1)
Caution : Although it is SKD model, adjust area option in SET assembly process.
Caution : Don’t Push
“IN-STOP” key after PCB assembly adjustment
Enter Password
MODEL : XXXXXX Module : XXXX
S/W Ver. : X.XX
UTT X Temp : xxxxx : Celsius
ADC CAL. ROM : XXXXXXX
RGB : OK
Component SD OK
Component HD OK
EDID RGB(OK) HDMI1(OK) HDMI2(OK) HDMI3(OK)
S/W Ver. : X.XX
UTT X Temp : xxxxx : Celsius
ADC CAL. ROM : XXXXXXX
RGB : OK
Component SD OK
Component HD OK
EDID RGB(OK) HDMI1(OK) HDMI2(OK) HDMI3(OK)
Tool Option
4
Area Option
40
Option 1
17
Option 2 40
Option 3
Option 3
0
:
:
:
*
*
*
*
Close
Click on the first or last page to see other 50PT255C-TA (CHASSIS:PP11K) service manuals if exist.