Read LG 50PT255C-TA (CHASSIS:PP11K) Service Manual online
LGE Display Division LG(51)
Establish : 2009-08-17
Reform : 2009-09-28
PP01A/B/C
Adjust Specification
11/
30
* Profile : Must be changed the option value because being different with some setting value
depend on module, inch and market
* Equipment : adjustment remote controller
1)
Push the IN-START key in the Adjust R/C.
2)
Enter Password number. The value of Password is “0 0 0 0”.
Close
Enter Password
*
*
*
*
3)
Input the Option Number that was specified in the BOM, into the Shipping area.
4) Select “
Tool Option
” by using ▲/▼(CH+/-) key , and press the number key(0~9)
consecutively
ex) If the value of
Tool Option1
is 4, input the data using number key “4”
(Fig. 1)
5) if it is EU model ( such as 42/50PJ**R-ZA ), select “Area option” by using ▲/▼(CH+/-) key ,
and press the number key(0~9) consecutively.
and press the number key(0~9) consecutively.
ex) If the value of Area Option is 40, input the data using number key “40” (Fig. 1)
Caution : Don’t Push
“IN-STOP” key after PCB assembly adjustment
* PP01A/B/C Tool option
Model
Tool option
Area Option
42PT250R-
TA
13
1
50PV250R-
TB
19
1
6)
EDID D/L Method.
After software D/L or PCBA manufacturing, you can download EDID Data.
When you adjust Tool Option, PP01A/B/C Model EDID download process is executed
automatically
*If the model don’t have HDMI 3, HDMI 3 will be disappeared at OSD Window.
Caution : When you adjust tool option, don’t connect HDMI or D-sub cable.
If you connect some cable, EDID D/L process will be failed.
7) Adjustment method
Before PCBA check, have to change the Tool option and Area option
※
About PDP
After done all adjustments, Press IN-START button and compare Tool option and Area option
LGE
Click on the first or last page to see other 50PT255C-TA (CHASSIS:PP11K) service manuals if exist.